Mystery Wood Bowl (47)

Turned bowl #47, showing detail of the rim

A friend of mine in Virginia sent me some wood recently, which included a blank of “definitely not mulberry,” which he had picked up somewhere. It had pretty grain, but he hasn’t been turning a lot of bowls lately, so he passed it along to me.

Turned bowl, showing side and interior

It took me a few days to find the right shape for the bowl within the blank. I started by getting it close, but with ½ inch thick walls, and then staring at it while I figured out what shape it needed to be.

Turned bowl, showing interior, heartwood/sapwood transition, and spalting.

Once I decided that I wanted a defined rim on the bowl, I finished thinning the walls (to a little under ⅜ inch, or 9mm), mostly hollowing them from the inside, though cutting the rim from the outside. I had a tiny bit of chip-out right near the transition from heartwood to sapwood, but decide to leave it, rather than removing the rim I’d made, which is a good feature of the bowl.

Bottom of turned bowl, showing signature and date

Finish is a couple coats of tung oil, some shellac, and Ack’s Finishing Paste. The bowl is about 7 inches in diameter, and 4½ inches tall.

I’m pretty happy with this one, and my sweetie thinks it’s a “keeper,” which means we need to find a place to display it. I guess there are worse problems to have.

#woodworking #woodturning #bowl

Discuss... Or contact me in the fediverse @davepolaschek@writing.exchange